Product ID:ELAST-A-BOND V/A COATING, E 400
MSDS Date:01/01/1989
FSC:8030
NIIN:00N017977
MSDS Number: BLZSB

EVR-GARD COATINGS CO

16400 GARFIELD AVENUE
PARAMOUNT, CA 90723
US

Emergency Phone: 213-531-0131

Info Phone: 213-531-0131

Cage: 5G582

EVR-GARD COATINGS CO

PARAMOUNT, CA 90723 US

Telephone: 310-531-0131

Cage: 5G582

0.1 @ 68F.

CAS: 107-21-1

RTECS: KW2975000

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM VAPOR/MIST, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

PROPIONIC ACID, 2-METHYL-, MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: MAY CAUSE HEADACHE AND NAUSEA,
DIZZINESS. SKIN/EYES: PRIMARILY AN IRRITANT. REDNESS OR RASH ON
SKIN. INGEST: NAUSEA, DIZZINESS, HEADACHES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED CONTACT WITH MATERIAL MAY
CAUSE DERMATITIS.

First Aid:INHAL: REMOVE PATIENT TO FRESH AIR. EYES: FLUSH WITH CLEAN
WATER FOR AT LEAST 15 MINUTES. SKIN: REMOVE SATURATED CLOTHING AND
WASH SKIN WITH SOAPY WATER THOROUGHLY. INGEST: INDUCE VOMITING WITH
1 OZ O F SYRUP OF IPECAC FOLLOWED IN 5 MINUTESWITH A GLASS OF
WATER. CALL MD.

Lower Limits:0.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:THIS IS A WATER-BASED PRODUCT. WILL NOT
SUPPORT COMBUSTION. USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:ABSORB SPILL WITH ANY ABSORBENT
MATERIAL--SAWDUST, SAND, CLAYS, ETC, AND FLUSH SPILL AREA WITH LOTS
OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:THIS PRODUCT IS STABLE UNDER NORMAL
USE AND STORAGE CONDITIONS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP FROM FREEZING. DO
NOT TAKE INTERNALLY.

Respiratory Protection:THE USE OF NIOSH/MSHA APPROVED MASKS DURING
APPLICATION TO AVOID EXCESSIVE INHALATION OF VAPORS IS HIGHLY
RECOMMENDED. OPEN WINDOWS AND DOORS OR USE OTHER MEANS TO INSURE
FRESH AIR ENTRY DURING APPLIC ATION AND DRYING.
Ventilation:PROVIDE ADEQ VENT AT ALL TIMES DURING HNDLG & APPLIC OF
THIS PROD. INSURE ADEQ SUPPLY OF FRESH AIR AT ALL TIMES.
Protective Gloves:BUNA N GLOVES, IF REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:MASKS, GLOVES AS NEEDED TO PREVENT PROLONGED
CONTACT.
Work Hygienic Practices:OBSERVE STANDARD HYGIENIC PRACTICES WHEN
HANDLING THIS PRODUCT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Vapor Pres:SEE ING 01
Vapor Density:>AIR
Spec Gravity:1.4
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:THICK LIQUID, WHITE AND COLORS, SLIGHT AMMONIA
SMELL.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALIS AND MATERIALS THAT REACT WITH WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURE AREAS.
Hazardous Decomposition Products:NONE

Waste Disposal Methods:PLACE ALL HAZARDOUS WASTES, INCLUDING ABSORBENTS
USED FOR SPILLS, IN 55 GAL METAL DRUMS AND DISPOSE IN APPROVED
DUMPSITE IN ACCORDANCE WITH PRESCRIBED FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.